TBI3 status interface board - technical overview
The TBI3 Status Interface board is used to create a physical electrical connection from an SLD (Sliding Link Disconnect) terminal block to an IoAT2 Analog Termination board utilizing 5/8” stud spacing. The TBI3 board is primarily used in retrofit RTU applications in which the wiring from monitored analog points is terminated to an SLD terminal block. These blocks are mounted inside an enclosure, adjacent to corresponding IoAT2 boards. Manufacturers of this type of terminal block include States and Poweright.
The attached .pdf document provides technical information on the TBI3 status interface board:
- general description
- board drawings
Note: the complete Callisto RTU manual can be found in the knowledge base article entitled "Callisto RTU - technical guide".