Fiber optic tranceivers - technical overview

Callisto processing nodes or full RTUs can be networked together in a point-to-point or star configuration. The nodes/RTUs can be connected via RS-485 cabling or fiber optics, allowing a host RTU to communicate with slave RTUs. There are two Callisto fiber optic transceivers, the 1 Port Fiber Optic Transceiver and the 4 Port Fiber Optic Transceiver.

The attached .pdf document provides technical information on Callisto fiber optic tranceivers:

• general description
• links
• connections
• LEDs
• board drawings
• technical specifications

Note: the complete Callisto RTU manual can be found in the knowledge base article entitled "Callisto RTU - technical guide".